A few weeks ago I saw a jewelry holder made out of a large frame and chicken wire. I don't know where the original one I saw was, but it might be
this one. It's turquoise and beautiful, but it would clash in my bedroom. Here's what I did...
I bought a big frame from a thrift store for $3.59.
I tore off the paper backing, removed the staples with pliers, and tossed the art and glass. Next I spray painted it grey.
After it dried completely, flip it over. Cut your chicken wire slightly bigger than the frame. I used my staple gun to attach it and then hammered the staples all the way in.
Next up, I snipped off the edges, leaving just enough to fold back so that it doesn't slip through the staples.
I bought tiny "s" hooks from Lowe's to hang my jewelry on.
I might decide to add a cluster of fabric rosettes to one corner, we'll see.
I tore off the paper backing, removed the staples with pliers, and tossed the art and glass. Next I spray painted it grey.
After it dried completely, flip it over. Cut your chicken wire slightly bigger than the frame. I used my staple gun to attach it and then hammered the staples all the way in.
Next up, I snipped off the edges, leaving just enough to fold back so that it doesn't slip through the staples.
I bought tiny "s" hooks from Lowe's to hang my jewelry on.
I might decide to add a cluster of fabric rosettes to one corner, we'll see. 
cute!
ReplyDelete